PJSC  «PoltavKhimMash»produces and supplies the collectors and other storage tanks:

• The horizontal collectors with elliptic bottoms from the carbon steel with  the volume of 10-200 m3;
• The horizontal collectors with a flat bottoms and strengthening from the carbon steel with volume of  10-200 m3;
• The air tanks with capacity of  3,2-32 m3;
• The vertical collectors with a  beaded conic bottoms with volume of 8-50 m3 from the carbon and stainless steels;
• Underground and land tanks for the liquefied hydrocarbon  gases with volume of  5-100 m3;
• The tanks for the carbon dioxide liquid  with volume of  50,7 m3;
• The silos for the bulk storage and  discharge of the  farinaceous grain raw, fish meal and tankage and ready made mixed feeds, the volume of silos is 32 and 61m3. 

The works under individual order can produce and delivery the collectors:

• horizontal ones with a volume from  6 up to  200 m3
• vertical ones with volume from 3,2 up to 50m3

operating for  the  filling and under the pressure up to 1,6 MPa (16 kgf/cm2) from the carbon and rust-resisting steels.

The works supplies the tank towers with volume of  25 m3, 50 m3; stamped blanks of the elliptic bottoms as per GOST 6533 with diameter from  1600 to 3200 mm, wall thickness  from 9 to  30 mm from the carbon and low alloyed steels, as well as the gas lift valves for the gas lift method of crude oil output.

Besides above said  the works can design, manufacture and delivery under the individual orders the following:

• apparatuses with stirring devices with volume from  6 to 50 m3;
• columns with diameter from  600 mm to 3200 with the thermal and mass-transfer standard devices;
• other equipment from the carbon, low alloyed and rust-resisting steels.

  Collector is intended for the underground and land storage of the light petroleum product and made from the steel  Ст3 пс 4.